Replacement Diaphragm for Timpano Tempesta TPT-RPDH2000 TPT-DH2000 Driver, 6 pcs

  • Beitrags-Autor:
  • Beitrags-Kategorie:
  • Beitrags-Kommentare:0 Kommentare

Replacement Diaphragm for Timpano Tempesta TPT-RPDH2000 TPT-DH2000 Driver, 6 pcs Nominal Impedance: 8 ohmsThe RPDH2000 is a replacement Diaphragm for the TPT-DH2000 Pro audio compression driver. Repair your Timpano Drivers for a fraction of the cost of buying a new one!

WeiterlesenReplacement Diaphragm for Timpano Tempesta TPT-RPDH2000 TPT-DH2000 Driver, 6 pcs

Celestion TF0818 8″ Replacement Midbass / Midrange Speaker 200 Watt Woofer 8-Ohm

  • Beitrags-Autor:
  • Beitrags-Kategorie:
  • Beitrags-Kommentare:0 Kommentare

The Celestion TF is a closed-back midrange design to provide system builders with a dependable, comprehensive range of conventional, pressed steel, Ferrite magnet drivers. Celestion TF0615MR 6" Midrange Closed Sealed Back Speaker 100W Woofer 8-Ohm 4PCS.

WeiterlesenCelestion TF0818 8″ Replacement Midbass / Midrange Speaker 200 Watt Woofer 8-Ohm

Celestion TF0615 6-inch 6.5-inch Midrange Speaker 100Watt RMS Woofer 8ohm T5889A

  • Beitrags-Autor:
  • Beitrags-Kategorie:
  • Beitrags-Kommentare:0 Kommentare

Celestion TF0615 6" 100 Watt Professional Woofer Driver 8 Ohm. Power Handling (RMS) 100 Watts. A cloth sealed surround is combined with an optimized Kevlar-loaded paper cone, to ensure the speaker's frequency response is smooth and extended.

WeiterlesenCelestion TF0615 6-inch 6.5-inch Midrange Speaker 100Watt RMS Woofer 8ohm T5889A

Celestion H1-9040P 1″ Exponential Horn 90×40 2-Bolt

  • Beitrags-Autor:
  • Beitrags-Kategorie:
  • Beitrags-Kommentare:0 Kommentare

The H1-9040P exponential horn from Celestion is ideal for designs where wide horizontal and narrow vertical dispersion is desired. With a 90° H x 40° V radiation pattern, this horn will produce room filling output while minimizing floor and ceiling reflection. With a 2-bolt mount and loading down to 1,500 Hz, the H1-9040P is compatible with many of the most popular compression drivers available. Finally, the reinforced ABS plastic construction provides excellent damping and reliable performance. _x000D_ _x000D_ Specifications: • Throat diameter: 1" • Driver mounting: 2-bolt/3-bolt • Nominal coverage: 90°H x 40° V • Cutoff frequency: 1,500 Hz • Dimensions: 7.8" H x 12.5" W x 8.2 " D • Cutout dimensions: 6.5" H x 10.2" W.

WeiterlesenCelestion H1-9040P 1″ Exponential Horn 90×40 2-Bolt

Beyma 8MFE 8″ 8-inch MidBass Midrange Voice Speaker Woofer 8M/FE 100 W RMS

  • Beitrags-Autor:
  • Beitrags-Kategorie:
  • Beitrags-Kommentare:0 Kommentare

Beyma 8MFE 8" 100 Watt-RMSMidBass/Midrange Speaker 8M/FE The Beyma 8MFE Loudspeaker handles 100 watts RMS and 200 watts program power handling. Its low harmonic distortion and controlled dispersion make it perfect for high quality mid-frequency reproduction. Good power handling (100 w RMS)Low harmonic distortionControlled dispersion up to 3 kHzDesigned for high quality mid-frequency reproduction Technical Specifications Nominal Diameter 200 mm / 8 inchRated Impendance 4 ohmsMinimum Impedance 3.7 ohmsPower Capacity 100 W RMSProgram Power 200 WSensitivity 96 dB 1w @ 1mFrequency Range 150 - 7000 HzRecom. enclosure vol 18 / 30 L 0.65 / 1.10 ft.3Voice coil diameter 38.5 mm. 1.5 in.Magnetic assembly weight 2.8 kg. 6.17 lb.Moving mass 0.015 kg.Voice coil length 7.5 mm.Air gap height 7 mm. Thiele-Small Parameters Resonant frequency, fs 90 HzD.C. Voice coil resistance, Re 3.7 ohms.Mechanical Quality Factor, Qms 4.01Electrical Quality Factor, Qes 0.39Total Quality Factor, Qts 0.36Equivalent Air Volume to Cms, Vas 13 LMechanical Compliance, Cms 209 µm / NMechanical Resistance, Rms 2.11 kg / sEffective Surface Area, Sd (m 2 ) 0.021 m2Maximum Displacement, Xmax 1 mm.Displacement Volume, Vd 21 cm.3Voice Coil Inductance, Le @ 1 kHz 0.3 mH Net weight 6.25 lb.Shipping weight 7 lb.

WeiterlesenBeyma 8MFE 8″ 8-inch MidBass Midrange Voice Speaker Woofer 8M/FE 100 W RMS