Phenolic Resin

PRV D4400Ph-Nd v2 Phenolic 400 Watts 2″ Horn Driver Neodymium + WGP14-50X Blue

  • Beitrags-Autor:
  • Beitrags-Kategorie:
  • Beitrags-Kommentare:0 Kommentare

INCLUDES: 1X D4400Ph-Nd V2 Phenolic Neodymium Compression Driver + WGP14-50X Blue CR Wave Guide - 400 Watts Program PowerFEATURES: The D4400Ph-Nd v2 is the evolution of our most famous midrange neodymium compression driver. This new design has improved efficiency, and strong vocal reproduction, making it the ideal choice for extreme car audio competitions. The nearly indestructible Phenolic Diaphragm structure, designed for vocal reproduction, allows low midrange reproduction from 450 Hz, which makes this driver ideal for reproducing the important vocal range with enough output to keep up the most powerful low frequency speakers. The Brazilian phenolic technology delivers natural response throughout the vocal midrange frequencies.Car audio SPL enthusiasts use this 2” driver for vocal reinforcement on 3-way systems.The large high temperature 4 inch voice coil can handle up to 400 watts of musical power.For the highest output audio systems, this 109 dB efficient driver provides competition performance.Features a strong 6″ diameter neodymium ring magnet that reduces overall size and weight (vs. the ferrite D4400Ph) Using a 6.10″ diameter neodymium motor provides a more compact design for easy front-mount installation with WGP22-50 horns, providing a compact yet powerful driver that solves the spacing and weight issues for large systems. Mounting hardware is included. TRIO by PRV uses the latest Brazilian phenolic technology designed for vocal reproduction. The phenolic diaphragm is attached to a 4″ diameter copper-clad aluminum wire with Kapton® former for a high 400 Watts RMS musical power handling, when used with recommended HPF: 700 Hz at 12 dB per octave filter Crossover / BT12650 Hz at 18 dB per octave filter Crossover / BT18 Its incredible output capabilities make this midrange driver one of the loudest vocal drivers on the market! A significant improvement in this second version was the larger aluminum phase plug, which provides better voice coil heat dissipation and high output levels. This design, an exclusive from PRV Audio for neodymium midrange drivers provides better vocal response and efficiency. The Trio series driver is one of the top choices for car audio competitors.GENERAL SPECIFICATIONS Exit Throat Diameter 2” (50 mm) Nominal impedance 8 Ohm Nominal Power Handling* 200 Watts Continuous Program Power(RMS)** 400 Watts Peak Power*** 800 Watts Sensitivity 2.83V at 1m 109 dB Recommended Hi Pass Crossover For Full Power Handling 700 Hz 12db/oct Crossover Frequency Response at -10dB 450 – 7,500 Hz Voice Coil Diameter 4” (101.6 mm) Voice Coil Wire CCAW Voice Coil Former Material Kapton Diaphragm Material Phenolic Flux Density 1.95 T Magnet Material Neodymium EXTRA INFO Overall Diameter 6.10″ (155 mm) Overall Depth 3.25″ (82.5 mm) Mounting Bolt Circle M6 x 4 4″ (102 mm) Net Weight 8.81 lbs (4.0 kg) Shipping Weight 9.25 lbs (4.2 kg) Carton Dimensions W x L x H 6.5″ x 6.5″ x 4.72″ (165 x 165 x 120 mm)

WeiterlesenPRV D4400Ph-Nd v2 Phenolic 400 Watts 2″ Horn Driver Neodymium + WGP14-50X Blue

4x PRV Audio D270Ph-S 1″ Phenolic Driver 150 Watts 8 Ohms + WG11-25 Black Horn

  • Beitrags-Autor:
  • Beitrags-Kategorie:
  • Beitrags-Kommentare:0 Kommentare

Includes: 4x D270Ph-S 1" Exit Phenolic Compression Driver 4x WG11-25 Black Waveguides Features: D270Ph-S The latest addition to the TRIO By PRV 1” Exit phenolic family, the D270Ph-S is a new and improved compact driver that is all about high output and low distortion vocal reproduction all the way down to 500 Hz! This new driver is the perfect solution for use in high output PA and PRO audio on wheels systems.Highlights2″ phenolic diaphragm provides extreme clarity in the critical mid or vocal rangeNew and improved design based on our D250Ph-S Ideal driver for mid range and vocal reinforcementCompact driver size is perfect for conditions where space is a concernBrazilian Phenolic Technology Designed For Vocal Reproduction. High temperature copper wire is used for the voice coil that is wound on a Kapton former to withstand high operating temperatures. The old replacement diaphragm RPD250Ph still fits the D270Ph-S driver.The nearly indestructible phenolic diaphragm, that can play down to 500 Hz, ( RPD270Ph ) is built to resist the elements, making it perfect for outdoor use.Compact driver design for easy front mount installation. Based on the design of our D250Ph-S this more compact driver was created to supply the demand in the market. The small diameter of the driver allows for front mounting, making it easy to install without having to detach the driver from the horn.Comparison with old D250Ph-s with the new D270Ph-S improved performance.Designed to reproduce the all-important vocal range with authority! This mid range compression driver and horn is a great choice for high power public address (PA) Systems small venues and gymnasiums. Car audio SPL enthusiasts use this combo for vocal reinforcement on 3 way systems.GENERAL SPECIFICATIONSExit Throat Diameter1″ (25.4 mm)Nominal impedance8 OhmsRated AES Power Handling (RMS)75 WattsProgram Power150 WattsSensitivity 2.00V at 1m107.5 dBRecommended Hi Pass Crossover** **For Full Power Handling500 Hz** **12db Per Octave CrossoverFrequency Response at -10dB400 – 8,000 HzVoice Coil Diameter2″ (50 mm)Voice Coil WireCopperVoice Coil Former MaterialKaptonDiaphragm MaterialPhenolic resinFlux Density1.10 TMagnet MaterialFerrite EXTRA INFOOverall Diameter4.01″ (102 mm)Front Mount Baffle Cutout2.55″ (65 mm)Mounting Thread1 3/8″ 18 TPINet Weight2.64 Lbs (1.20 kg)Shipping Weight2.80 Lbs (1.27 kg)Carton Dimensions W x L x H4.21″ x 4.21″ x 2.83″ (107 x 107 x 72 mm) WG11-25 Black Screw-On compact PRV Audio’s WG11-25 exponential horn. At under 3″ of depth this horn makes installation easy in tight spaces.A standard 1-3/8″-18 TPI Screw on mount is compatible with most 1″ compression drivers. The WG11-25 is constructed from non-resonant ABS plastic making it perfect for outdoor or automotive use. Acoustic loading is maintained down to 1200 Hz.HighlightsUnder 3″ of mounting depth for installation in tight spaces1″ Exit throatNon-resonant reinforced plastic constructionMinimum recommended frequency of 1200 Hz GENERAL SPECIFICATIONSThroat Diameter1” (25.4mm)Mounting TypeScrew-onThread dimensions1-3/8″Nominal Coverage Horizontal60° Vertical60°Flare typeExponentialMaterialPlastic (ABS)Finish / CoatingWhiteDimensions Height4.5″ (115mm) Width4.5″ (115mm) Depth2.95″ (75mm) Mount Depth2.71″ (69mm)Baffle Cutout Width3.31″ (84mm) Height3.31″ (84mm)Net weight0.18lb (0.08kg)

Weiterlesen4x PRV Audio D270Ph-S 1″ Phenolic Driver 150 Watts 8 Ohms + WG11-25 Black Horn

4x PRV Audio D270Ph-S 1″ Exit Screw-on Phenolic Compression Driver 8Ohm 150W Max

  • Beitrags-Autor:
  • Beitrags-Kategorie:
  • Beitrags-Kommentare:0 Kommentare

Includes: 4x D270Ph-S 1" Exit Phenolic Compression Driver Features:The latest addition to the TRIO By PRV 1” Exit phenolic family, the D270Ph-S is a new and improved compact driver that is all about high output and low distortion vocal reproduction all the way down to 500 Hz! This new driver is the perfect solution for use in high output PA and PRO audio on wheels systems.Highlights2″ phenolic diaphragm provides extreme clarity in the critical mid or vocal rangeNew and improved design based on our D250Ph-S Ideal driver for mid range and vocal reinforcementCompact driver size is perfect for conditions where space is a concernBrazilian Phenolic Technology Designed For Vocal Reproduction. High temperature copper wire is used for the voice coil that is wound on a Kapton former to withstand high operating temperatures. The old replacement diaphragm RPD250Ph still fits the D270Ph-S driver.The nearly indestructible phenolic diaphragm, that can play down to 500 Hz, ( RPD270Ph ) is built to resist the elements, making it perfect for outdoor use.Compact driver design for easy front mount installation. Based on the design of our D250Ph-S this more compact driver was created to supply the demand in the market. The small diameter of the driver allows for front mounting, making it easy to install without having to detach the driver from the horn.Comparison with old D250Ph-s with the new D270Ph-S improved performance.Designed to reproduce the all-important vocal range with authority! This mid range compression driver and horn is a great choice for high power public address (PA) Systems small venues and gymnasiums. Car audio SPL enthusiasts use this combo for vocal reinforcement on 3 way systems.GENERAL SPECIFICATIONSExit Throat Diameter1″ (25.4 mm)Nominal impedance8 OhmsRated AES Power Handling (RMS)75 WattsProgram Power150 WattsSensitivity 2.00V at 1m107.5 dBRecommended Hi Pass Crossover** **For Full Power Handling500 Hz** **12db Per Octave CrossoverFrequency Response at -10dB400 – 8,000 HzVoice Coil Diameter2″ (50 mm)Voice Coil WireCopperVoice Coil Former MaterialKaptonDiaphragm MaterialPhenolic resinFlux Density1.10 TMagnet MaterialFerrite EXTRA INFOOverall Diameter4.01″ (102 mm)Front Mount Baffle Cutout2.55″ (65 mm)Mounting Thread1 3/8″ 18 TPINet Weight2.64 Lbs (1.20 kg)Shipping Weight2.80 Lbs (1.27 kg)Carton Dimensions W x L x H4.21″ x 4.21″ x 2.83″ (107 x 107 x 72 mm)

Weiterlesen4x PRV Audio D270Ph-S 1″ Exit Screw-on Phenolic Compression Driver 8Ohm 150W Max

2x PRV Audio D270Ph-S 1″ Exit Screw-on Phenolic Compression Driver 8Ohm 150W Max

  • Beitrags-Autor:
  • Beitrags-Kategorie:
  • Beitrags-Kommentare:0 Kommentare

Includes: 2x D270Ph-S 1" Exit Phenolic Compression Driver Features:The latest addition to the TRIO By PRV 1” Exit phenolic family, the D270Ph-S is a new and improved compact driver that is all about high output and low distortion vocal reproduction all the way down to 500 Hz! This new driver is the perfect solution for use in high output PA and PRO audio on wheels systems.Highlights2″ phenolic diaphragm provides extreme clarity in the critical mid or vocal rangeNew and improved design based on our D250Ph-S Ideal driver for mid range and vocal reinforcementCompact driver size is perfect for conditions where space is a concernBrazilian Phenolic Technology Designed For Vocal Reproduction. High temperature copper wire is used for the voice coil that is wound on a Kapton former to withstand high operating temperatures. The old replacement diaphragm RPD250Ph still fits the D270Ph-S driver.The nearly indestructible phenolic diaphragm, that can play down to 500 Hz, ( RPD270Ph ) is built to resist the elements, making it perfect for outdoor use.Compact driver design for easy front mount installation. Based on the design of our D250Ph-S this more compact driver was created to supply the demand in the market. The small diameter of the driver allows for front mounting, making it easy to install without having to detach the driver from the horn.Comparison with old D250Ph-s with the new D270Ph-S improved performance.Designed to reproduce the all-important vocal range with authority! This mid range compression driver and horn is a great choice for high power public address (PA) Systems small venues and gymnasiums. Car audio SPL enthusiasts use this combo for vocal reinforcement on 3 way systems.GENERAL SPECIFICATIONSExit Throat Diameter1″ (25.4 mm)Nominal impedance8 OhmsRated AES Power Handling (RMS)75 WattsProgram Power150 WattsSensitivity 2.00V at 1m107.5 dBRecommended Hi Pass Crossover** **For Full Power Handling500 Hz** **12db Per Octave CrossoverFrequency Response at -10dB400 – 8,000 HzVoice Coil Diameter2″ (50 mm)Voice Coil WireCopperVoice Coil Former MaterialKaptonDiaphragm MaterialPhenolic resinFlux Density1.10 TMagnet MaterialFerrite EXTRA INFOOverall Diameter4.01″ (102 mm)Front Mount Baffle Cutout2.55″ (65 mm)Mounting Thread1 3/8″ 18 TPINet Weight2.64 Lbs (1.20 kg)Shipping Weight2.80 Lbs (1.27 kg)Carton Dimensions W x L x H4.21″ x 4.21″ x 2.83″ (107 x 107 x 72 mm)

Weiterlesen2x PRV Audio D270Ph-S 1″ Exit Screw-on Phenolic Compression Driver 8Ohm 150W Max

2x PRV Audio D270Ph 1″ Phenolic TRIO Driver 150W 8 Ohms + WG11-25 White Horn

  • Beitrags-Autor:
  • Beitrags-Kategorie:
  • Beitrags-Kommentare:0 Kommentare

Includes: 2x D270Ph-S 1" Exit Phenolic Compression Driver 2x WG11-25 White Waveguides Features: D270Ph-S The latest addition to the TRIO By PRV 1” Exit phenolic family, the D270Ph-S is a new and improved compact driver that is all about high output and low distortion vocal reproduction all the way down to 500 Hz! This new driver is the perfect solution for use in high output PA and PRO audio on wheels systems.Highlights2″ phenolic diaphragm provides extreme clarity in the critical mid or vocal rangeNew and improved design based on our D250Ph-S Ideal driver for mid range and vocal reinforcementCompact driver size is perfect for conditions where space is a concernBrazilian Phenolic Technology Designed For Vocal Reproduction. High temperature copper wire is used for the voice coil that is wound on a Kapton former to withstand high operating temperatures. The old replacement diaphragm RPD250Ph still fits the D270Ph-S driver.The nearly indestructible phenolic diaphragm, that can play down to 500 Hz, ( RPD270Ph ) is built to resist the elements, making it perfect for outdoor use.Compact driver design for easy front mount installation. Based on the design of our D250Ph-S this more compact driver was created to supply the demand in the market. The small diameter of the driver allows for front mounting, making it easy to install without having to detach the driver from the horn.Comparison with old D250Ph-s with the new D270Ph-S improved performance.Designed to reproduce the all-important vocal range with authority! This mid range compression driver and horn is a great choice for high power public address (PA) Systems small venues and gymnasiums. Car audio SPL enthusiasts use this combo for vocal reinforcement on 3 way systems.GENERAL SPECIFICATIONSExit Throat Diameter1″ (25.4 mm)Nominal impedance8 OhmsRated AES Power Handling (RMS)75 WattsProgram Power150 WattsSensitivity 2.00V at 1m107.5 dBRecommended Hi Pass Crossover** **For Full Power Handling500 Hz** **12db Per Octave CrossoverFrequency Response at -10dB400 – 8,000 HzVoice Coil Diameter2″ (50 mm)Voice Coil WireCopperVoice Coil Former MaterialKaptonDiaphragm MaterialPhenolic resinFlux Density1.10 TMagnet MaterialFerrite EXTRA INFOOverall Diameter4.01″ (102 mm)Front Mount Baffle Cutout2.55″ (65 mm)Mounting Thread1 3/8″ 18 TPINet Weight2.64 Lbs (1.20 kg)Shipping Weight2.80 Lbs (1.27 kg)Carton Dimensions W x L x H4.21″ x 4.21″ x 2.83″ (107 x 107 x 72 mm) WG11-25 White Screw-On compact PRV Audio’s WG11-25 exponential horn. At under 3″ of depth this horn makes installation easy in tight spaces.A standard 1-3/8″-18 TPI Screw on mount is compatible with most 1″ compression drivers. The WG11-25 is constructed from non-resonant ABS plastic making it perfect for outdoor or automotive use. Acoustic loading is maintained down to 1200 Hz.HighlightsUnder 3″ of mounting depth for installation in tight spaces1″ Exit throatNon-resonant reinforced plastic constructionMinimum recommended frequency of 1200 Hz GENERAL SPECIFICATIONSThroat Diameter1” (25.4mm)Mounting TypeScrew-onThread dimensions1-3/8″Nominal Coverage Horizontal60° Vertical60°Flare typeExponentialMaterialPlastic (ABS)Finish / CoatingWhiteDimensions Height4.5″ (115mm) Width4.5″ (115mm) Depth2.95″ (75mm) Mount Depth2.71″ (69mm)Baffle Cutout Width3.31″ (84mm) Height3.31″ (84mm)Net weight0.18lb (0.08kg)

Weiterlesen2x PRV Audio D270Ph 1″ Phenolic TRIO Driver 150W 8 Ohms + WG11-25 White Horn