Peluso TR-14 Vacuum Tube Ribbon Microphone Mic w/Flight Case | Atlas Pro Audio

  • Beitrags-Autor:
  • Beitrags-Kategorie:
  • Beitrags-Kommentare:0 Kommentare

Atlas Pro Audio Questions About This Item? Ask a Question through eBay! Brand New Peluso TR-14 Vacuum Tube Ribbon Microphone Peluso TR-14Vacuum Tube Ribbon Microphone Vacuum Tube version of the R 14 Ribbon Microphone. It offers enhanced output level and a stunning response due to the perfect impedence match with the amplifier. The design of this microphone is inspired by classic ribbon microphones with the addition of a tube stage to provide added gain. It has a natural rich and silky sound with additional harmonic complexity provided by the tube stage. It is the perfect complement to your microphone collection, offering a distinct color difference from condenser microphones. Microphone, PSU, 7 Conductor Cable, Shockmount, Wood Box and Flight Case. Call for information! Technical Data Type: Ribbon-Velocity Studio Microphone Operating Principle: Electrodynamic Pressure Gradient Magnets: Rare Earth Neodymium Frequency Range: 30 Hz/16k Hz Polar Pattern: Figure 8 (Bi-Directional) Sensitivity: > -35 dBV (re 1v/pa) Impedance: 200 ohms SPL: 149 db Equivalent Noise: 15 dB(A) Tube Type: CK5784 / 6J1P sub-miniature glass tube Power Requirements: Dedicated Power Supply, 115V or 230V AC Size: 36mm x 210 mm Weight: 450g TAPE OP REVIEW'Not only does it have that classic vintage ribbon sound but it's a vintage TUBE ribbon sound. It's a bizarre cross section between a tube condenser and a ribbon. Perfect for my own jazz, acoustic sensibilities. It's gets that smooth, silky ribbon sound, which is already warm, with the added warmth of tube and gain with the condenser.' 'This thing sounds great on electric guitar! I used it on over driven guitar with a classic '65 Fender Deluxe Reverb and my old Strat. I placed the mic in a variety of places, but preferring it, in this case, about 2 inches in front of the grill. It turned out a big sweet sound. I had to boost the EQ about 3 db at 3.5K, which is pretty standard for me to get the sound I like with ribbons and this guitar. There was less proximity effect than with the R-14, but it was just a great sound. And then I used it on my Gibson ES-355 and a Seymore Duncan Convertible for some fantastic crunchy guitar. It's the best sound yet I've had with that combination, -- and I've been doing that guitar/amp combo for probably 20 years or more!' 'And if you want a great ribbon, with that classic vintage sound, but are concerned about gain with your pre, this is the ribbon for you!' Henry Robinett, TapeOp At Atlas Pro Audio it is our priority to have great customer service. We are dealers for over 90 lines of the best high-end pro audio gear available. We are authorized dealers, meaning you will get the full warranty on this unit! Consumer Notice: If you purchase a unit from a non-authorized dealer or a used unit you may not get the product warranty. Please check out our other eBay listings & eBay store! Thanks! US Buyers: Payment Method: Confirmed Paypal, we only ship to the confirmed address. Thank you. Adult Signature required for delivery. FLORIDA RESIDENTS Add 7% SALES TAXeBay collects sales tax where applicable. Lower 48 states, US Ground Shipping & Insurance in the US is FREE. Hawaii and Alaska residents please email for quote. Best offer, if accepted, does not include free shipping. International Buyer Terms: See Global Shipping ProgramConfirmed Paypal accepted as payment.Warranty valid in US only, buyer pays shipping costs (and any duties/taxes/etc) in case of warranty repair.Please email us if you have any questions. Thank you. Atlas Pro Audio © 2000-2021 Atlas Pro Audio All rights reserved. Unauthorized reproduction is prohibited by law, subject to criminal prosecution.

WeiterlesenPeluso TR-14 Vacuum Tube Ribbon Microphone Mic w/Flight Case | Atlas Pro Audio

6 Pcs 8pin Tube Socket Bakelite Vacuum Tube Protect Tube Pin Socket Black

  • Beitrags-Autor:
  • Beitrags-Kategorie:
  • Beitrags-Kommentare:0 Kommentare

What is this?Electronic tube base: as a connector connecting PCB circuit board and electronic tube, it is mainly used for spare parts of audio vacuum electronic tube. These parts are used with electronic tubes in audio equipment to improve the sound quality.What will I get?Color:Black;Model: GZS8-B2;Terminal: 8 pins;Material: Bakelite , Tinning Plated;Size:32x13.5x22mm/1.26x0.53x0.87 Inch(W*H*total H);Outside diameter:45.5mm/1.79 Inch;Installation hole spacing: 38mm/1.5 inch;Panel opening diameter:27.5mm/1.08 Inch;Pack of 6 Tube Socket;Suitable for KT66 KT88 6SL7 6SN7 6V6 5AR4/GZ34 5R4GY 5U4G 6AS7G 6B4G 6BL7GT 6F6 6J5 6J7 6L6 6SJ7 274B 348A 350B 421A 5691 etc. tube;Is there any advantages of the product?The valve tube socket is made of bakelite socket and tough thick gold plating pin. Durable and not easy to rust.How to use it?1.

Weiterlesen6 Pcs 8pin Tube Socket Bakelite Vacuum Tube Protect Tube Pin Socket Black

Stoel Music Systems Vacuum Tube Distortion, Dark Mode Eurorack Modular Synth

  • Beitrags-Autor:
  • Beitrags-Kategorie:
  • Beitrags-Kommentare:0 Kommentare

The Stoel Music Systems Vacuum Tube Distortion in Dark Mode provides two stages of vacuum tube distortion/waveshaping with a switch that selects between using one or both gain stages in series. The first stage is always active. A two-position switch adds the second stage in series after the first. The harmonics knob controls the amount of even-order or odd-order harmonics in the first gain stage. The saturation knob controls the gain and the shaping of the waveform. The saturation is also controllable with CV by using the front panel jack and corresponding knob to set the amount of CV applied to the shape parameter. At extreme negative CV, the tube will go into cutoff, making it function as a voltage-controlled gate. The recommended tube is a 12AT7/ECC81, which ships with the module. If experimenting with tubes is desired, we suggest trying variations of the 12AU7, including the ECC82, ECC802, 5814A, 6189, or 6680. The 12AX7 will also function and does not harm the module, but during our testing, the sonic results varied too widely from tube to tube for us to recommend using it, so consider it an experimental option. We do not recommend or support the use of any other tubes. The tube socket is a high-quality ceramic socket. All Stoel Music Systems modules feature aluminum front panels with a durable high-gloss white finish. For a crisp appearance and exceptional durability, the front panel markings are digitally printed at high-resolution with UV-cured ink. Mounting holes are plated to significantly reduce screw rash. The power connection features polarity protection to prevent accidental damage to the module if it is connected backward. Each module includes a 12” long 10-pin to 16-pin ribbon cable compatible with the Eurorack standard, M3 mounting screws, and a complimentary sticker.

WeiterlesenStoel Music Systems Vacuum Tube Distortion, Dark Mode Eurorack Modular Synth

Traverse Analogue 652 Dual-Channel Vacuum Tube Preamplifier #VK01422 (Used)

  • Beitrags-Autor:
  • Beitrags-Kategorie:
  • Beitrags-Kommentare:0 Kommentare

Category 500 Series Modular Synth Keyboards Microphones Preamps Dynamics Equalizers Monitoring Computer Audio Interfaces Software Beat Production VINTAGE KING APPROVED This item has been carefully inspected, tested and serviced by our expert tech team. All vintage, used and open-box items we sell are backed by an industry-leading warranty. Expand your studio with confidence knowing that we have you covered. Traverse Analogue 652 Dual-Channel Vacuum Tube Preamplifier #VK01422 (Used) The Traverse Analogue 652 is a dual-channel vacuum tube preamplifier with mic, line, and instrument inputs. The unique circuit provides up to 60 dB of gain using the vacuum tube input stage, followed by a master attenuation control in the discrete output buffer stage. Want a clean yet musical replication of the source? How about the creamy saturation of an esoteric vintage preamplifier? The 652's gentle drive characteristics allow for a broad tonal palette, depending on the gain selection and how hard you hit it with signal. It can be used with all types of microphones (including ribbons) and the line level input pad allows you to add warmth and coloration to any track from a digital audio workstation. The switched ¼” DI jack on the front is perfect for the direct recording of unbalanced instruments. Vintage sound, feel, and vibe. Hand-soldered and crafted with passion. The ultimate stereo tube preamp for the modern studio. FEATURES: Vacuum tube (12AX7) input stage with 12-postion GAIN rotary switch (5 – 60 dB) High voltage transistor buffer output stage with MASTER variable attenuator Sifam AL20SQ isolated VU metering with traditional “ballistics” Class A operation, low noise topology Custom Lundahl input and output transformers Sealed switching relays with gold-plated contacts Input impedance switch for XLR (300 ohms, 1200 ohms) Line-level pad switch for XLR (15K ohms) ¼” DI instrument input (4.7 Meg ohms) Phase inversion switch High-pass filter switch (80 Hz) Phantom power switch (+48V DC) Regulated linear power supply with current limiting High-quality Beldfoil shielded wiring used throughout 16-gauge steel chassis with 3/16” thick anodized aluminum front 2 Year Limited Warranty About Us Since 1993, we have been committed to equipping our customers with the very best gear, advice, and personal service anywhere. We believe that great sound can be achieved at any budget. We also believe that the ambitions of our customers should always come first. For us, it's about building long-lasting relationships, not just selling gear. And over the years, those beliefs have turned customers into friends and family. Whether you're just starting out, or a seasoned pro, we're here for you, no matter where your audio travels may take you. Shipping Policy Free ground shipping to the lower 48 states Via FedEx. All of our items ship via FedEx. On checkout, it may look like you are selecting a UPS shipping method, but the item will be shipped via the equivalent FedEx method. Import Duties and Tax Since import taxes and/or duties that your government might impose on products shipped from the United States may apply, you (the customer), are solely responsible for shipping charges, taxes, and duties, once goods arrive in your country. Undeliverable/Rejected Package If your package was rejected by your local Customs Bureau or the shipment could not be delivered and was returned to Vintage King Audio for any reason, we are not responsible for the shipping costs. Free Extended Warranty All new items that Vintage King carries are subject to our FREE extended warranty protection. Basically, if the manufacturer offers a 1-year warranty on your product, then you are covered under the same warranty terms for a total of 2 years from the time of initial shipment. Likewise, if the manufacturer offers a 5-year warranty, then you receive a total of 6 years of coverage when purchased through Vintage King. We add 1 year to your standard manufacturer's warranty period, FREE of charge, whatever the manufacturer's warranty period may be. Duties and tax for warranty and damage replacement items International Duties and tax for warranty and damage replacement items may apply. Even though you may have paid shipping, taxes or duty on your original order, it is IMPORTANT to understand that your government may impose duties and taxes for warranty items or replacement items damaged during shipment from the United States for the new order. You (the customer), are solely responsible for shipping charges, taxes, and duties, once goods arrive in your country. Used Item Warranties Vintage King offers an industry-leading level of technical service and warranty support on our used and vintage items. Our used item warranty periods are as follows: Analog Outboard Gear 1 Year Microphones 1 Year (excluding capsules, tubes, and ribbon elements) Speakers 1 Year (excluding drivers) Digital Outboard Gear 30 Days Return Policy We do our best to help you choose the perfect gear, but if you don't love it in the first 30 days after receipt, please contact us through eBay for a return authorization. Note: Software is not returnable or refundable. What Are "Demo Deal" or "B-Stock" Products? Our Demo Deals and B-Stock products offer a unique opportunity to save big on near-mint condition, fully warrantied gear. These items have been opened for demonstration purposes and put back in the box without extended use. All original factory accessories and packaging are included. In addition to the manufacturer's warranty, Demo Deal and B-Stock items also come with an additional 1-year of warranty coverage from Vintage King, free of charge, so rest assured that not only are you saving big by purchasing a Demo Deal/B-Stock item, but you will also receive the same level of world-class support from Vintage King as with the purchase of a factory-sealed unit. Taxes Vintage King collects sales tax for shipments to Alabama, Arkansas, Arizona, California, Colorado, Connecticut, Florida, Georgia, Hawaii, Idaho, Illinois, Indiana, Iowa, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, Nebraska, Nevada, New Jersey, New Mexico, New York, North Carolina, Ohio, Oklahoma, Pennsylvania, South Carolina, Tennessee, Texas, Utah, Vermont, Virginia, Washington, Washington D.C., Wisconsin and Wyoming. Partial and complete tax exemptions may be available in your state. Contact us through eBay for details. Note: eBay may collect sales tax in states not listed above.

WeiterlesenTraverse Analogue 652 Dual-Channel Vacuum Tube Preamplifier #VK01422 (Used)