1 pair

Newer & More Improved Rack Ears!! The previous version allowed the user to mount the mixer flush OR recessed in the rack. But, when using flush mount, some of the ventilation holes were blocked by the ears. The latest version, I'm calling "Gen 3", has a ventilation grid that matches up very well with the vent holes on both the Behringer and Midas mixers. These rack ears fis the Behringer XR18 mixer, as well as the others listed. If recess mount is chosen, the ears recess the mixer so that the handles are flush with the front of the brackets (see picture). This allows cables to remain plugged in with minimal interference from the rack cover when closed. If flush mount is chosen, the face of the mixer is flush with the rest of the rack equipment. And all the ventilation holes are still fully open. Pass through holes allow cables to easily pass from the rear of the rack to the front of the mixer. The brackets are strong! 3D printed, and made from PLA Plus material, which is equivalent in strength to ABS material. It is made with a 100% infill - making these parts solid plastic. Extra thick, with all right angle interior corners reinforced by design. Note the stacks of quarters in the pictures, showing the thickness in millimeters of the two mounting surfaces. I also learned there are rack cases out there that are a bit narrower than the standard opening. As a result, my earlier rack ears required a bit of "width reduction", on the order of 1/8 to 3/16" overall. because the overall width of the unit with the ears interfered with the rack. This issue has been completely solved. These ears mounted on the mixer yield an overall width of the mixer at 18-15/16", which is within the 19" "standard" rack opening. Made in the USA by a US Veteran-owned business.