• 165 mm (6.5 in) woofer with Kevlar-reinforced cone and 38 mm (1.5 in) voice coil. Extraordinary clarity for speech, with extended frequency response for music. 70 Hz – 18 kHz frequency response. Overload protection.
INCLUDES: 4x PRV Audio TW700Ti Chrome Pro Audio Super Tweeters 8 Ohm - 960 Watts Package - 240 Watts each tweeter FEATURES: Add detail to any speaker with PRV Audio’s TW700Ti CHROME titanium bullet super tweeter! With high frequency response up to 20,000 Hz and a sensitivity of 107 dB at 1W/1m, the TW700Ti Series PRO Audio Tweeter can keep up with even the most demanding speaker systems.A square faceplate makes it easier to install, made from a strong aluminum horn, which offers a smooth response and extremely high efficiency, enabling it to cover a wide frequency range and offer a smooth response.4″ Square PRO Audio Super Tweeter – Built to Perform to add high output, high frequency response to large output systemsHigh Temperature 1.5″ diameter voice coil capable of handling up to 240 Watts musical program power up to 240 Watts of amplifier RMS powerDesigned for high frequency reproduction at a high SPL level with low distortion thanks to its large motor.The built-in capacitor acts as a crossover and attenuates the low frequencies for smooth frequency response.Available in White and Black Finish!Enhancing its versatility, the flat sides of the tweeter allow for seamless side-by-side mounting, ensuring efficient use of space.The incorporation of an oversized magnet system further amplifies the magnetic field within the gap, resulting in heightened sensitivity and minimal distortion, thereby optimizing overall sound quality.A capacitor is included for protection from damaging frequencies at high power. Mounting hardware included.Not only does this PRO audio bullet tweeter look as good as it sounds it is also able to take a huge amount of power due to its 1.5″ diameter copper voice coil. Up to 240 watts of musical program power are on tap to keep up with the most demanding professional audio, high output home audio, and high SPL car audio systems.Recommended Settings with DSP/CrossoverWe strongly recommended ALWAYS to use a high pass filter ( HPF ) on or to the amplifier channel that will be running the tweeters.If you have just a high output crossover such as: EX3.5 STEREO or EX4.6 PRO – Use the HIGH OUT channel to feed the amplifier input with a HPF set to:At 5000Hz – if you are running just a speaker and tweeter setup At 8000Hz – If you are running a 3-Way system ( speaker, phenolic driver and tweeter )If you are taking your system to the next level and tuning it with a digital signal processor: DSP2.4X or DSP2.8X – Set on the channel to feed the amplifier input with a HPF set to:At 5000Hz at LR18 – if you are running just a speaker and tweeter setupAt 7000Hz at LR24 – If you are running a 3-Way system ( speaker, phenolic driver and tweeter ) GENERAL SPECIFICATIONSNominal impedance8 OhmNominal Power Handling120 WattsContinuous Program Power (RMS)240 WattsMax Peak Power480 WattsSensitivity 2.83V at 1m107 dBRecommended Hi Pass Crossover****For Full Power Handling5000 Hz****12db Per Octave CrossoverFrequency Response at -10dB3,500 – 20,000 HzVoice Coil Diameter1.5”(38 mm)Voice Coil WireCCAWVoice Coil Former MaterialKaptonDiaphragm MaterialTitaniumFlux Density1.60 TMagnet MaterialFerriteEXTRA INFOOverall Depth2.97” (75.54 mm)Mounting Depth2.55” (64.9 mm)Overall Width4.05” (103 mm)Overall Height4.05” (103 mm)Cutout Diameter3.58” (91 mm)Net Weight3.58 lbs (1.58 kg)Shipping Weight3.62 lbs (1.64 kg)Carton Dimensions W x L x H4.5” x 4.5” x 3.25”(114 x 114 x 82.5 mm)
Pair PRV Audio TW700Ti-CR Super Tweeter 240W 8 Ohm Titanium Bullet Pro Car Audio Brazilian-designed, high-end drivers for every job PRV Audio pro audio speakers: road-worthy, but without boutique prices! Includes: 2x PRV Audio TW700Ti-CR Super Tweeters SPECS: Type: Super Tweeter Nominal Impedance: 8Ω Rated Power Handling: 120 Watts Program Power: 240 Watts Sensitivity (1W/1m): 108 dB Frequency Range at -10 dB: 3,500 - 20,000 Hz Recommended Hi Pass X-Over: 5000 Hz (12 dB/Octave) Voice Coil Diameter: 1.5" Magnet Material: Ferrite Diaphragm Type: Titanium Weight: 3.48 Lbs Replacement Diaphragm: RPTW700Ti MSRP: $99.96
INCLUDES: 4x PRV Audio TW700Ti Pro Audio Super Tweeters 8 Ohm - 960 Watts Package - 240 Watts each tweeter FEATURES: Add detail to any speaker with PRV Audio’s TW700Ti BLACK titanium bullet super tweeter! With high frequency response up to 20,000 Hz and a sensitivity of 107 dB at 1W/1m, the TW700Ti Series PRO Audio Tweeter can keep up with even the most demanding speaker systems.A square faceplate makes it easier to install, made from a strong aluminum horn, which offers a smooth response and extremely high efficiency, enabling it to cover a wide frequency range and offer a smooth response.4″ Square PRO Audio Super Tweeter – Built to Perform to add high output, high frequency response to large output systemsHigh Temperature 1.5″ diameter voice coil capable of handling up to 240 Watts musical program power up to 240 Watts of amplifier RMS powerDesigned for high frequency reproduction at a high SPL level with low distortion thanks to its large motor.The built-in capacitor acts as a crossover and attenuates the low frequencies for smooth frequency response.Available in White and Chrome Finish!Enhancing its versatility, the flat sides of the tweeter allow for seamless side-by-side mounting, ensuring efficient use of space.The incorporation of an oversized magnet system further amplifies the magnetic field within the gap, resulting in heightened sensitivity and minimal distortion, thereby optimizing overall sound quality.A capacitor is included for protection from damaging frequencies at high power. Mounting hardware included.Not only does this PRO audio bullet tweeter look as good as it sounds it is also able to take a huge amount of power due to its 1.5″ diameter copper voice coil. Up to 240 watts of musical program power are on tap to keep up with the most demanding professional audio, high output home audio, and high SPL car audio systems.Recommended Settings with DSP/CrossoverWe strongly recommended ALWAYS to use a high pass filter ( HPF ) on or to the amplifier channel that will be running the tweeters.If you have just a high output crossover such as: EX3.5 STEREO or EX4.6 PRO – Use the HIGH OUT channel to feed the amplifier input with a HPF set to:At 5000Hz – if you are running just a speaker and tweeter setup At 8000Hz – If you are running a 3-Way system ( speaker, phenolic driver and tweeter )If you are taking your system to the next level and tuning it with a digital signal processor: DSP 2.4X or DSP 2.8X – Set on the channel to feed the amplifier input with a HPF set to:At 5000Hz at LR18 – if you are running just a speaker and tweeter setupAt 7000Hz at LR24 – If you are running a 3-Way system ( speaker, phenolic driver and tweeter ) GENERAL SPECIFICATIONSNominal impedance8 OhmNominal Power Handling120 WattsContinuous Program Power (RMS)240 WattsMax Peak Power480 WattsSensitivity 2.83V at 1m107 dBRecommended Hi Pass Crossover****For Full Power Handling5000 Hz****12db Per Octave CrossoverFrequency Response at -10dB3,500 – 20,000 HzVoice Coil Diameter1.5”(38 mm)Voice Coil WireCCAWVoice Coil Former MaterialKaptonDiaphragm MaterialTitaniumFlux Density1.60 TMagnet MaterialFerriteEXTRA INFOOverall Depth2.97” (75.54 mm)Mounting Depth2.55” (64.9 mm)Overall Width4.05” (103 mm)Overall Height4.05” (103 mm)Cutout Diameter3.58” (91 mm)Net Weight3.58 lbs (1.58 kg)Shipping Weight3.62 lbs (1.64 kg)Carton Dimensions W x L x H4.5” x 4.5” x 3.25”(114 x 114 x 82.5 mm)
INCLUDES: 2x PRV Audio TW700Ti Pro Audio Super Tweeters 8 Ohm - 480 Watts Package - 240 Watts each tweeter FEATURES: Add detail to any speaker with PRV Audio’s TW700Ti BLACK titanium bullet super tweeter! With high frequency response up to 20,000 Hz and a sensitivity of 107 dB at 1W/1m, the TW700Ti Series PRO Audio Tweeter can keep up with even the most demanding speaker systems.A square faceplate makes it easier to install, made from a strong aluminum horn, which offers a smooth response and extremely high efficiency, enabling it to cover a wide frequency range and offer a smooth response.4″ Square PRO Audio Super Tweeter – Built to Perform to add high output, high frequency response to large output systemsHigh Temperature 1.5″ diameter voice coil capable of handling up to 240 Watts musical program power up to 240 Watts of amplifier RMS powerDesigned for high frequency reproduction at a high SPL level with low distortion thanks to its large motor.The built-in capacitor acts as a crossover and attenuates the low frequencies for smooth frequency response.Available in White and Chrome Finish!Enhancing its versatility, the flat sides of the tweeter allow for seamless side-by-side mounting, ensuring efficient use of space.The incorporation of an oversized magnet system further amplifies the magnetic field within the gap, resulting in heightened sensitivity and minimal distortion, thereby optimizing overall sound quality.A capacitor is included for protection from damaging frequencies at high power. Mounting hardware included.Not only does this PRO audio bullet tweeter look as good as it sounds it is also able to take a huge amount of power due to its 1.5″ diameter copper voice coil. Up to 240 watts of musical program power are on tap to keep up with the most demanding professional audio, high output home audio, and high SPL car audio systems.Recommended Settings with DSP/CrossoverWe strongly recommended ALWAYS to use a high pass filter ( HPF ) on or to the amplifier channel that will be running the tweeters.If you have just a high output crossover such as: EX3.5 STEREO or EX4.6 PRO – Use the HIGH OUT channel to feed the amplifier input with a HPF set to:At 5000Hz – if you are running just a speaker and tweeter setup At 8000Hz – If you are running a 3-Way system ( speaker, phenolic driver and tweeter )If you are taking your system to the next level and tuning it with a digital signal processor: DSP 2.4X or DSP 2.8X – Set on the channel to feed the amplifier input with a HPF set to:At 5000Hz at LR18 – if you are running just a speaker and tweeter setupAt 7000Hz at LR24 – If you are running a 3-Way system ( speaker, phenolic driver and tweeter ) GENERAL SPECIFICATIONSNominal impedance8 OhmNominal Power Handling120 WattsContinuous Program Power (RMS)240 WattsMax Peak Power480 WattsSensitivity 2.83V at 1m107 dBRecommended Hi Pass Crossover****For Full Power Handling5000 Hz****12db Per Octave CrossoverFrequency Response at -10dB3,500 – 20,000 HzVoice Coil Diameter1.5”(38 mm)Voice Coil WireCCAWVoice Coil Former MaterialKaptonDiaphragm MaterialTitaniumFlux Density1.60 TMagnet MaterialFerriteEXTRA INFOOverall Depth2.97” (75.54 mm)Mounting Depth2.55” (64.9 mm)Overall Width4.05” (103 mm)Overall Height4.05” (103 mm)Cutout Diameter3.58” (91 mm)Net Weight3.58 lbs (1.58 kg)Shipping Weight3.62 lbs (1.64 kg)Carton Dimensions W x L x H4.5” x 4.5” x 3.25”(114 x 114 x 82.5 mm)