2022

1 Pair Bolt-On to Screw-On 1-3/8” Male Horn Adapters for 1″ Compression Drivers

  • Beitrags-Autor:
  • Beitrags-Kategorie:
  • Beitrags-Kommentare:0 Kommentare

YOU ARE BUYING 2 ADAPTERS FOR 1" COMPRESSION DRIVERS The MB Acoustics PT-ADAPT-B driver mounting adapter is designed for the most universal applications with elongated holes for spacing from 2.25" through 3". Compared to others that only have a 2.25" or 3" spacing with no in-between size option. Adapter for Bolt-On Driver to Screw-On Horn (1-3/8" 18 TPI) Holes for small 4, 3 and 2 bolt mounting configurationsMaterial: High Tensil Strength ABS PlasticDimensions: 3.75" diameter x 7/8" depth (94mm x 22mm)Thread Diameter: 1 3/8" - 34.9mmBolt Spacing: 2.25" for 3-bolt Compression Drivers through 3" for 2-bolt and small 4-bolt Compression DriversMake sure to use washers or (headed compression limiters) to maintain the integrity of the ABS material.

Weiterlesen1 Pair Bolt-On to Screw-On 1-3/8” Male Horn Adapters for 1″ Compression Drivers

2x Titanium Compression Drivers,1.75″ VC,8Ω,650W,2/3-Bolt + Screw-In DE250TN MB

  • Beitrags-Autor:
  • Beitrags-Kategorie:
  • Beitrags-Kommentare:0 Kommentare

YOU ARE BUYING 2 DRIVERS WITH 2 SCREW-ON ADAPTERS The MB Acoustics MB-DE250TN is an improved 1" throat High Frequency Compression Driver with a Titanium (CCAW) Voice Coil on a Heat Resistant Kapton (KSV) Former, matched to a powerful 22oz magnet to achieve maximum SPL on a small frame with a 2/3 Bolt-On configuration + 1 3/8" thread Screw-In adapter. Bolt-On Compression Driver (2 pieces)ABS Plastic Screw-On Adapter (2 pieces) *mounting screws included.Frame: Die-cast AluminumVoice Coil: 1.75", (CCAW) on Kapton (KSV) material with Titanium DiaphragmMagnet Structure: 22oz.Aluminum HousingFrequency Response: 2,000 - 20,000 HzSensitivity: 106dB @ 1W/1mImpedance: 8 ohms1" ThroatWatts: 650Wmax / 120W ContinuousDimensions of Driver without Screw-On adapter: 4.5" diameter x 2.125" depth (114mm x 54mm)Mounting: Bolt-On (2/3 configurations) + Screw-On (1 3/8" thread)Driver Weight: 3.44 lbs (each) Original Replacement Diaphragm available in the following link: https://www.ebay.com/itm/235197150203

Weiterlesen2x Titanium Compression Drivers,1.75″ VC,8Ω,650W,2/3-Bolt + Screw-In DE250TN MB

2x 15″ Pro PA Woofer Transducer, 4″ Glass Fibre IN-OUT V.C. 2300W, MB Acoustics

  • Beitrags-Autor:
  • Beitrags-Kategorie:
  • Beitrags-Kommentare:0 Kommentare

YOU ARE BUYING 2 PRO 15" LF DRIVERS For 18" version go to: https://www.ebay.com/itm/233894268640 The MB Acoustics MB-15TBX100 15" Professional LF Driver was designed for Low Frequency applications. Compatible Replacement Woofer:B&C 15TBX100YORKVILLE 7524 for EF508, EF500P and TX4 4" Diameter Copper Wire IN/OUT Glass Fibre Voice Coil and Ventilated Magnet Assembly for High Thermal capabilities, Demodulation Ring for Reduce Distortion matched to a 130oz magnet, you have the industry standard found in well-established loudspeaker enclosures. These great characteristics coupled with a Heavy Duty Fiber Reinforced Non-Pressed Cone, Cloth-edge Surround, Heavy Duty Spider and Spring Terminals will give you a loudspeaker with similar capabilities to the B&C comparable at a lower price point. 15" Low Frequency Driver4" Glass Fibre Voice Coil FormerInside/Outside Copper Wire Voice CoilAluminum Demodulation Ring for Lower DistortionFiber Reinforced Cone Cast Aluminum BasketMagnet Weight: 130ozVentilated Magnet AssemblyFrequency Response: 38Hz - 2700HzSensitivity: 98dB (1W/1M)Power: 1000Wrms / 2300WmaxRated Impedance: 8 ohmBaffle Cutout Hole Diameter: 14.13" to 14.33" (359mm to 364mm)Overall Outside Diameter: 15.63" (397mm)Mounting Depth: 6.14" (156mm)Overall Depth: 6.7" (170mm)Shipping Weight: 29 LBS (each woofer)TRIPLED BOXED (1 double wall box + 1 single wall box)FOR SAFE ARRIVAL!

Weiterlesen2x 15″ Pro PA Woofer Transducer, 4″ Glass Fibre IN-OUT V.C. 2300W, MB Acoustics

MB Acoustics Polyimide Compression Driver 1.75″ VC 8Ω 700W 2/3-Bolt-On DE250P

  • Beitrags-Autor:
  • Beitrags-Kategorie:
  • Beitrags-Kommentare:0 Kommentare

YOU ARE BUYING 1 DRIVER The MB Acoustics MB-DE250P is an improved 1" throat High Frequency Compression Driver with a Polyimide Diaphragm, Flat Wire (CCAR) on a Heat Resistant Kapton (KSV) Former, matched to a powerful 22oz magnet to achieve maximum SPL on a small frame with a 2/3 Bolt-On configuration + Screw-On Adapter included. SPECIFICATIONS:Bolt-On + Screw-On Polyimide 1" Compression DriversVoice Coil Diameter: 1.75"Voice Coil Diaphragm Dome: PolyimideVoice Coil Wire: Flat Ribbon (CCAR)Voice Coil Former: Kapton (KSV)Magnet Weight: 22oz.Die-cast Aluminum HousingFrequency Response: 1kHz - 18kHzSensitivity: 108.5dB @ 1W/1mNominal Impedance: 8 ohmsThroat Diameter: 1”Watts: 700Wmax / 135W Continuous Program PowerRecommended Crossover: 1.6 kHzMounting: Bolt-On 2/3 configuration + Screw-On Adapter included (See photos)Dimensions: 4.5" diameter x 2.125" depth (114mm x 54mm)Net Weight: 3.3 LBSOriginal Replacement Diaphragm available, model MB-DE250P-VC (Sold separately)

WeiterlesenMB Acoustics Polyimide Compression Driver 1.75″ VC 8Ω 700W 2/3-Bolt-On DE250P