DescriptionCondition：NEW ■Flexible mixing is possibleThe top panel is equipped with 14 channels of analog inputs consisting of 10 MICx, 14 LINEx, and 2 INSTx, allowing flexible and easy connection of microphones, instruments, and sound sources for live mixing and recording. Bluetooth 5.0 compatible stereo channels with RCA pin jacks and stereo mini jack inputs are also provided. ■Natural and pure soundTASCAM Ultra-HDDA (High Definition Discrete Architecture) microphone preamplifier circuitry is used for 1-8 channels of microphone inputs. This provides natural and transparent sound. ■Fully-featured channel stripsEach channel is equipped with a gain knob for fine-tuning the input level. A low-cut filter and LIVE/PC/MTR mode selector switch are located below it, allowing flexible combination of different input sources. Channels 1-8 also feature a 1-knob compressor and 3-band mid parametric EQ. Intuitive and quick operation is achieved. ■Smart audio routing and monitoring.The master section has three independent MAIN, SUB, and CR outputs, while the auxiliary output section provides three outputs (MON1, MON2 [pre/post switchable], and FX). Audio signals can be sent to stage monitors, external effectors, signal processors, headphone mixes, etc. ■Powerful 16-track digital MTR functionThe TASCAM MTR is equipped with a high-performance multi-track engine that incorporates TASCAM's expertise in recording technology. Up to 16 tracks (14 inputs + main mix) can be recorded to an SD card at 24 bit/48 kHz. It can be used for a wide range of applications from live performances and rehearsals to lectures and meetings. In addition, a punch-in/punch-out function is also provided. Overdub recording is also easy. Mixing and mastering can be done on the spot, or exported to a PC for editing. High-quality audio interfaceA 16-in / 14-out USB audio interface is provided. The TASCAM USB driver allows the audio buffer value to be set to a minimum of 4 samples, providing low latency and highly efficient performance. ■Flexible input settingsA MODE switch on each channel allows you to select the source you need. All sources input to the Model 16 can be used simultaneously with the playback track of the built-in MTR and the sound source of DAW software via USB. ■16 types of multi-effectsThe effects section includes a total of 16 editable effects such as reverb, delay, chorus, and flanger. On/off operation is also possible via footswitch. ■Master section with 4-band EQThe master section is equipped with a 4-band EQ with HIGH/LOW shelving and WIDE/NARROW Q parametric. It can be inserted into the main outputs or mon1/2. ■Various optional accessoriesThe "AK-RM16" rack-mount adapter for rack installation and the "AK-DC16" dust cover to protect the main unit from dirt and dust are available. The "RC-1F" footswitch enables remote control of punch-in/punch-out and file playback. ■Function List16 multi-track recorders (MTR) are equipped. Simultaneous recording of up to 48 kHz/24-bit, 16 multi-tracks to SD card (Class 10 or higher)Punch-in and punch-out of up to 8 tracks16-input/14-output USB audio interface for input/output of audio data to/from DAW14 mixer inputs (10 mono XLR/TRS-balanced, 2 TRS-balanced stereo pairs)10-ch microphone preamplifiers, CH1-CH8 equipped with clear-toned TASCAM Ultra-HDDA microphone preamplifiersGain adjustment knobs (CH1-CH12) with signal LEDs with overload (OL)Live/PC/MTR mode switch for switching input source on each channelConvenient 1-knob compressor on mono input channels (CH1-CH8)3-band EQ on inputs and mid-parametric EQ (adjustable midrange frequency) on CH1-CH8100Hz low-cut filter (CH1-CH12)All XLR microphone inputs are +48V phantom power capableThree auxiliary outputs: AUX1 (pre), AUX2 (with pre/post switching), FX (post)Mute, MAIN/SUB bus assignment, and PFL switch on each input sectionBluetooth (Bluetooth 5.0) input supporting AAC and SBC codecsCH13/14 line inputs have RCA pins and 3.5mm stereo mini jacksHi/Lo shelving EQ, WIDE and NARROR Q parametric EQ (master output MAIN/SUB switchable)TASCAM built-in effects pedals with 16 presets including practical reverbs and delaysXLR balanced MAIN output and TRS balanced SUB outputHighly visible 12-segment LED output level meterOne stereo control room output6.3mm (1/4") stereo standard jack headphone outputRemote control jack for footswitch (6.3mm (1/4") TS standard jack for TASCAM RC-1F)Self-illuminated REC/PLAY operation keys with excellent visibilityEasy-to-use operation menu structureMulti-jog dials for easy menu operation19-inch rack mountable (rack mount kit sold separately as an option)? Soothing wood-grained side wood panel (removable for rack mounting) Size: 430(W) × 112.9(H) × 463(D)mm (including side panel and protruding parts)Weight: 7kgShippingWe always send the item with a tracking number. So please place an order without any concern on delivery.You can always track the delivery status. Shipping is only available to the address registered in eBay. If you want us to send another address, please change your address on eBay and then place an order.Shipping is available from Monday to Friday. Weekends are not available because freight companies are closed. International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.