Fireface UFX II

RME Fireface UFX II | 60 Channel USB 2.0 Audio Interface RME Fireface UFX II 60 Channel USB 2.0 Audio Interface The unique Fireface UFX II is the premier solution to transfer analog and digital audio data directly to a computer from practically any source. Numerous unique features, well thought-out configuration dialogs, an industry-leading mixing engine and monitoring solution, professional DSP effects and class-leading analog circuits with latest digital converters put the Fireface UFX II at the very top of the range of computer-based audio interfaces. Features and further detailsTechnical Specifications Analog AD, Line In 1-8, rear Resolution AD: 24 bit Signal to Noise ratio (SNR): 113 dB RMS unweighted, 116 dBA Frequency response @ 44.1 kHz, -0.1 dB: 5 Hz - 20.8 kHz Frequency response @ 96 kHz, -0.5 dB: 3 Hz - 45.8 kHz Frequency response @ 192 kHz, -1 dB: 2 Hz - 92 kHz THD: < -110 dB, < 0.00032 % THD+N: < -104 dB, 110 dB Maximum input level: +19 dBu Input: 6.3 mm TRS jack, electronically balanced Input impedance: 8 kOhm unbalanced, 12 kOhm balanced Input sensitivity switchable to Lo Gain, +4 dBu Input level for 0 dBFS @ Lo Gain: +19 dBu Input level for 0 dBFS @ +4 dBu: +13 dBu Variable gain: 0 to +12 dB Minimum level for 0 dBFS: +1 dBu, -1.2 dBV Microphone In 9-12, front As AD, but: Input: XLR, electronically balanced Input impedance: 3.4 kOhm Signal to Noise ratio (SNR): 115 dB RMS unweighted, 118 dBA Gain range: 75 dB Maximum input level, Gain 0 dB: +18 dBu Maximum input level, Gain 75 dB: -57 dBu CLIP LED: 0 dBFS SIG LED: -60 dBFS Instrument In 9-12, front As AD, but: Input: 6.3 mm TS jack, unbalanced Input impedance: 1 MOhm Signal to Noise ratio (SNR): 114 dB RMS unweighted, 118 dBA Gain range: 42 dB Maximum input level, Gain 8 dB: +21 dBu Maximum input level, Gain 50 dB: -21 dBu DA, Line Out 3-8, rear Resolution: 24 bit Dynamic range (DR): 115 dB RMS unweighted, 118 dBA Frequency response @ 44.1 kHz, -0.5 dB: 5 Hz - 20.8 kHz Frequency response @ 96 kHz, -0.5 dB: 5 Hz - 45 kHz Frequency response @ 192 kHz, -1 dB: 5 Hz - 89 kHz THD: < -110 dB, < 0.00032 % THD+N: < -104 dB, 110 dB Maximum output level: +19 dBu Output: 6.3 mm TRS jack, servo-balanced Output impedance: 75 Ohm unbalanced, 150 Ohm balanced Output level switchable Hi Gain, +4 dBu, -10 dBV Output level at 0 dBFS @ Hi Gain: +19 dBu Output level at 0 dBFS @ +4 dBu: +13 dBu Output level at 0 dBFS @ -10 dBV: +2 dBV DA - Stereo Monitor Output XLR (1-2) As DA, but: Output: XLR, balanced Output level switchable 24 dBu, Hi Gain, +4 dBu, -10 dBV Output level at 0 dBFS @ 24 dBu: +24 dBu Output level at 0 dBFS @ Hi Gain: +19 dBu Output level at 0 dBFS @ +4 dBu: +13 dBu Output level at 0 dBFS @ -10 dBV: +2 dBV DA - Stereo Monitor Output Phones (9-12) As DA, but: Output: 2 x 6.3 mm TRS stereo jack, unbalanced Maximum output level at 0 dBFS, High: +19 dBu Maximum output level at 0 dBFS, Low: +2 dBV Output impedance: 2 Ohm Max power per channel @ 32 Ohm load, 0.1% THD: 210 mW (2.6 Vrms, +10.5 dBu) MIDI 2 x MIDI I/O via 5-pin DIN jacks Galvanically isolated by optocoupled input Hi-speed mode: Jitter and response time typically below 1 ms Separate 128 byte FIFOs for input and output Digital Clocks: Internal, ADAT, AES, MADI, word clock Low Jitter Design: 30 dB (2.4 kHz) Effective clock jitter influence on AD and DA conversion: near zero PLL ensures zero dropout, even at more than 100 ns jitter Digital Bitclock PLL for trouble-free varispeed ADAT operation Supported sample rates: 28 kHz up to 200 kHz Digital Inputs AES/EBU 1 x XLR, transformer-balanced, galvanically isolated, according to AES3-1992 High-sensitivity input stage (< 0.3 Vpp) SPDIF compatible (IEC 60958) Accepts Consumer and Professional format Lock range: 27 kHz - 200 kHz Jitter when synced to input signal: 30 dB (2.4 kHz) ADAT Optical 2 x TOSLINK, format according to Alesis specification Standard: 2 x 8 channels 24 bit, up to 48 kHz Double Speed (S/MUX): 2 x 4 channels 24 bit 96 kHz Quad Speed (S/MUX4): 2 x 2 channels 24 bit 192 kHz Bitclock PLL ensures perfect synchronisation even in varispeed operation Lock range: 31.5 kHz - 50 kHz Jitter when synced to input signal: < 1 SPDIF optical (ADAT2) 1 x optical, according to IEC 60958 Accepts Consumer and Professional format Lock range: 27 kHz - 200 kHz Jitter when synced to input signal: 30 dB (2.4 kHz) Word Clock BNC Internal termination 75 Ohm switchable Automatic Double/Quad Speed detection and internal conversion to Single Speed SteadyClock guarantees super low jitter synchronization even in varispeed operation Not affected by DC-offsets within the network Signal Adaptation Circuit: signal refresh through auto-center and hysteresis Overvoltage protection Level range: 1.0 Vpp - 5.6 Vpp Lock Range: 27 kHz - 200 kHz Jitter when synced to input signal: 30 dB (2.4 kHz) Digital Outputs AES/EBU XLR, transformer-balanced, galvanically isolated, according to AES3-1992 Output level Professional 4.5 Vpp, Consumer 2.6 Vpp Format Professional according to AES3-1992 Amendment 4 Format Consumer (SPDIF) according to IEC 60958 Single Wire mode, sample rate 28 kHz up to 200 kHz ADAT 2 x TOSLINK Standard: 2 x 8 channels 24 bit, up to 48 kHz Double Speed (S/MUX): 2 x 4 channels 24 bit 96 kHz Quad Speed (S/MUX4): 2 x 2 channels 24 bit 192 kHz SPDIF optical (ADAT2) Format Consumer (SPDIF) according to IEC 60958 Sample rate 28 kHz up to 200 kHz Word Clock BNC Max. output voltage: 5 Vpp Output voltage @ 75 Ohm termination: 4.0 Vpp Output impedance: 10 Ohm Frequency range: 27 kHz - 200 kHz General Power supply: Internal switching PSU, 100 - 240 V AC, 36 Watts Idle power consumption: 19 Watts Typical power consumption: 22-25 Watts Dimensions including rack ears (WxHxD): 483 x 44 x 210 mm (19" x 1.73" x 8.5") Dimensions without rack ears (WxHxD): 440 x 44 x 210 mm (17.3" x 1.73" x 8.3") Total depth: 240 mm (9.4”) Weight: 3 kg ( 6.6 lbs) Temperature range: +5 up to +50 Celsius (41 F up to 122F) Relative humidity: < 75%, non condensing Contact us We can be contacted at any time through eBay messages if you have any questions, comments or product requests. We will respond to you within 24 hours and do our best to help you out! We encourage our customers to contact us with any questions or concerns! We'd like to be sure you are completely satisfied with your purchase. NEW ITEMS return policy 1. If you are not satisfied with your product, you may return it within 30-day window upon receiving the product. 2. Returns on new items are subject to restocking fees anywhere from 10-50% at the discretion of the seller. All returns will be inspected for any missing or damaged packaging or accessories or any other devaluation of the product. 3. Return shipping costs for new items are the responsibility of the buyer 4. Shipping charges incurred during fulfillment of the orders be deducted from the refund. 5. Items returned because a buyer found a "better price" will be subject to a partial refund. 6. All new item returns must receive an RMA number prior to the return. 7. Return items must be repackaged properly in the same care you received. USED/OPEN BOX Items return policy ALL sales are final / NO RETURN Any Items above $1000 return policy 1. These items purchased are not eligible for return unless if they are damaged/defective. CANCELLATIONS New and used items are subject to a 5% processing fee if cancelled before delivery.